> > >
> >
> >
Fixed Dialing Numbers (FDN) allows you to restrict outgoing calls to a limited
set of phone numbers.
eht sserP .1 Home key > > > Settings > Calls.
paT .2 Fixed Dialing Numbers and the following options are available.
• Enable FDN: Input the PIN2 code to enable the FDN feature.
• Change PIN2: Change the PIN2 code for FDN access.
• FDN list: Manage the FDN list.
Note: The PIN2 code is provided by your carrier. Entering an incorrect PIN2
code more times than allowed can get your nano-SIM card locked. Contact
the service provider for assistance.
Setting speed dials
You can press and hold the 1 ~ 9 keys from the dialer to call the corresponding
speed dial number.
The 1 key is reserved to speed dial your voicemail.
To assign a speed dial key:
eht sserP .1 Home key > >
> Settings > Speed dial settings.
.yek laid deeps a paT .2
pat ro rebmun enohp a retnE .3
and select one from the contact list.
paT .4 OK.
Setting vibration for call connection
You can set the phone to vibration when an outgoing call is answered.
eht sserP .1
Home key
> Settings > Sounds and vibration.
kcehC .2
Also vibrate for calls to turn on this feature.
Forwarding incoming calls
Call forwarding feature allows you to forward your incoming calls to another
phone number.
eht sserP .1 Home key >
> Settings > Call settings .
( noitpo elbaliava na paT .2 Always, When busy, When unanswered, or When
unreachable) to enable or disable it.
Setting caller ID and call waiting
eht sserP .1 Home key > Settings > Calls > GSM call settings >
paT .2 Caller ID to choose whether your number is displayed when someone
receives your outgoing call. Or check Call settings
incoming calls during a call.
Note: Please contact the service provider to check whether the caller ID and
call waiting features are available.
Setting TTY mode
Your phone is a TTY compatible device. A TTY device can allow people who
have hearing or speech disabilities to communicate by telephone. Simply
connect the TTY device to the phone’s headset jack.
Additional settings.
Select a TTY mode for your phone to work with a TTY device, or turn TTY off.
eht sserP .1 Home key Settings > Accessibility > TTY mode.
retirwepytelet ruoy tlusnoC .snoitpo gniwollof eht fo eno tceleS .2
manufacturer’s manual if necessary.
of
48 49
To Next Page
Loading...
