EasyManua.ls Logo

Cromtech Outback CTG2500i - Operation Instructions; Ventilation Requirement; Socket Cleaning Before Use; Pre-Operation Check Reminder

Cromtech Outback CTG2500i
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION INSTRUCTIONS
!
WARNING: Always operate generator in a well
venlated area. Never operate generator in a closed in
area as it may cause unconsciousness or even death within
minutes.
!
NOTE: Clean dust, dirt or water o the socket before
use. Before starng the engine, do not connect any
electrical devices.
!
NOTICE: Read PRE-OPERATION CHECK (see page XX)
carefully before operaon of generator.
!
NOTE: Generator can be used at rated output load in
standard atmospheric condions as follows:
Ambient temperature - 25°C
Atmospheric pressure - 1000KPa
Relave humidity - 30%
The generator output may dier due to changes in
temperature, altude (the higher altude, the lower air
pressure) and humidity.
STARTING THE GENERATOR
1. Hold the fuel tank cap to
avoid it moving, and turn vent
knob clockwise from OFF to
ON, so as to open the vent
hole. ① Vent knob
Pg. 18