Cromtech Outback CTG2500i - CTG2500 i Specifications; Noise Level Information; Noise Measurement Conditions; Noise Emission vs. Exposure

CTG2500i SPECIFICATIONS
2.4kVA CROMTECH™ GENERATOR
Power Factor (kVA) 2.4kVA
Max. Waage 2400was
Cont. Waage 2100was
Type Single Phase
Voltage Regulaon Inverter / Pure Sine Wave 2.5% THD
AC Output 240V - 50hz
Cromtech Engine LH148F(G)
Engine Type 4 stroke, air-cooled, single cylinder, OHV
gasoline engine
Displacement 2.6kw, 79cc
Engine Oil 300-400ml
Fuel Tank 5.0L
Spark Plug
A5RTC (TORCH)
Strarng System Recoil Start
Noise Level 52 - 59db at 7m*
Baery Charging 12V - 8Amp
USB (x2) 5V
Dimensions (LxWxH) 511x314x447mm
Weight 19.8kg
Package Dimensions 547x350x505mm
Run Time 5 to 20hours (depending on load)
*Noise level is measured when the smart-throle switch is
ON. LWA shows the sound power level under the ISO3744
standard test condion. The decibel rang is measured at
7m from the machine (Noise level may vary in dierent
environments).
NOISE LEVEL
The gures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a correlaon
between the emission and exposure levels, this cannot
be used reliably to determine whether or not further
precauons are required. Factors that inuence the actual
level of exposure of work-force include the characteriscs
of the work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent processes, and the
length of me for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country.
Pg. 34