Page 11
CE-Series
Amps with an Attitude!
Fig. 1.1
The CE-Series
Amplifier
Your
CE-Series
amp also comes with a standard SST module
(System Solution Topologies) that gives you the choice of bar-
rier strip,
1
/4-inch phone, or 3-pin XLR connectors and works
great in most situations. However, if you’re using your CE amp
for theater applications, or if you have other special input
needs, you can pull the standard SST module and simply plug
in one of our advanced SST modules, (such as our electronic
crossover).
Don’t forget the impressive output. The CE 1000 produces an
awesome 1,100 watts, while the CE 2000 pumps out 1,975
watts of power.* For output connectors, the
CE-Series
features
genuine Neutrik Speakon
®
4-pole connectors for quick, se-
cure and safe connections.
And, of course, there’s no mistaking a
CE-Series
amp. Its rugged
look will impress your friends almost as much as the Crown name.
This manual will help you correctly set up and use your new
amplifier—we strongly recommend you read all instructions,
warnings and cautions. Also, for your protection, please send
in your warranty registration card today. And save your bill of
sale—it’s your
ofof
ofof
of
ficial prficial pr
ficial prficial pr
ficial pr
oof of puroof of pur
oof of puroof of pur
oof of pur
chase.chase.
chase.chase.
chase.
* 1,100 watts and 1,950 watts total in bridge-mono at 4 ohms (for the CE
1000 and CE 2000 respectively), 560 watts and 975 watts per channel at 2
ohms. See the Specifications Section for details.
To Next Page
Loading...
