Crown CE Series Reference Manual

Page 4
CE-Series Amps with an Attitude!
Unpacking Your CE-Series Amp
Please unpack and inspect your amplifier for any damage that
may have occurred during transit. If damage is found, notify
the transportation company immediately. Only you can initiate
a claim for shipping damage. Crown will be happy to help as
needed. Save the shipping carton as evidence of damage for
the shipper’s inspection.
We also recommend that you save all packing materials so
you will have them if you ever need to transport the unit.
NEVER SHIP THE UNIT WITHOUT THE FACTORY PACK.

Crown CE Series Specifications

General

Frequency Response	20 Hz - 20 kHz ±0.5 dB
Signal to Noise Ratio	>100 dB (A-weighted)
Channels	2
Input Impedance	20 kOhms balanced, 10 kOhms unbalanced
Protection	Short circuit, thermal, and DC fault protection