Crown CE Series Reference Manual

Page 2
CE-Series Amps with an Attitude!
Da Rules
Da Rules
Hey! I'm Eric
Let me fill you
in about your
new CE-Series
Amp!!
3. WARNING: Shock
hazard. To reduce the
risk of fire or electric
shock, do not expose this
unit to rain or moisture.
Do not immerse your
CE-
Series
amplifier in any
liquid. Do not operate
your amplifier near a
pool, bathtub or other
standing water (even on
a dare).
4. Do not bypass or defeat
the grounding or
polarization means used
on the
CE-Series
amplifiers. Make sure all
blades on the polarized
power plug can be fully
inserted into the exten-
sion cord, receptacle or
other outlet that will be
used with the unit.
5. Your
CE-Series amp
should be cleaned only
with a damp cloth
6. Take care of the power
cord attached to your
CE-
Series
amplifier. Avoid
situations where your
cord might be stretched,
pinched, or otherwise
abused. Route it to avoid
foot traffic. Pay special
attention to the cord
connector and attachment
points.
1. Read all safety and operating instructions
before operating the
CE-Series amplifier.
Follow all instructions carefully and heed any
warnings given.
2. Do not drop or spill any foreign object or
liquid into the
CE-Series amplifier.

Crown CE Series Specifications

General

Frequency Response	20 Hz - 20 kHz ±0.5 dB
Signal to Noise Ratio	>100 dB (A-weighted)
Channels	2
Input Impedance	20 kOhms balanced, 10 kOhms unbalanced
Protection	Short circuit, thermal, and DC fault protection