Crown CE Series Reference Manual

Page 9
CE-Series Amps with an Attitude!
Illustrations
Typical Stereo Hookup .......................................... 7
1.1 The
CE-Series Amplifier ................................. 10-11
1.2 The Big Picture: Controls, Indicators and
Connectors ................................................... 12-13
2.1 Mounting Dimensions.......................................... 14
2.2 Mode Switch ....................................................... 15
2.3 Input Sensitivity Switch ........................................ 15
2.4 Typical Input Wiring ............................................. 16
2.5 Neutrik Speakon
®
NL4FC Assembly Order.......... 17
2.6 Neutrik Speakon
®
NL4FC Wiring ......................... 18
2.7 Stereo Output Wiring ........................................... 18
2.8 Bridge-Mono Output Wiring................................. 19
2.9 Neutrik NL4FC Insert into Housing ...................... 19
2.10 Stereo Hookup ............................................... 20-21
2.11 Bridge-Mono Hookup ..................................... 22-23
2.12 Neutrik NL4FC Chuck into Housing ..................... 24
2.13 Neutrik NL4FC Bushing onto Housing ................. 25
3.1 Front Panel Indicators & Controls ........................ 28
3.2 Back Panel Controls ............................................ 29
4.1 Balanced & Unbalanced Input Wiring ................. 31
4.2 Polarity Conversions............................................ 31
4.3 Balanced Input Wiring......................................... 33
4.4 Unbalanced Input Wiring .................................... 34
5.1 Block Diagram for Crown’s Crossover SST ..... 36-37
5.2 Fault Status LED Circuitry .................................... 38
5.3 RJ Jack Wiring and Pin Assignments .................. 38
5.4 Tamper-Resistant Hole Plugs............................... 39
6.1
CE-Series Amplifier Block Diagram ................ 40-41
7.1 Output Pin Assignments ...................................... 46
7.2 Awesome Frequency (Amplitude) Response....... 47

Crown CE Series Specifications

General

Frequency Response	20 Hz - 20 kHz ±0.5 dB
Signal to Noise Ratio	>100 dB (A-weighted)
Channels	2
Input Impedance	20 kOhms balanced, 10 kOhms unbalanced
Protection	Short circuit, thermal, and DC fault protection