Crypto AirData 150 S2 USB - Page 38

AirData 150 S2 USB User Manual
37
Click “Apply” button. The result is illustrated in the following picture.
Description of “DLS Status”:
As shown in the figure above, after configuring the DLS successfully, the MAC address of the
connected device and the Timeout Value of setting will be shown in the “DLS Status”. In the
“DLS Status” of the connected device, it shows the MAC address of the Airdata adapter and
the Timeout Value of setting.
Display the values of “DLS Status” to “Direct Link Setup” as follow:
In “DLS Status”, select a direct link STA that you want to show its values in “Direct Link
Setup”.