Operating Instruction and Documentation
CSL640/641
- 3 – TES1518/E
Foreword
CRYPTON-products are a result of long-standing experience.
The high quality and the superior concept guarantee them reliability, a long lift time and
economic business.
To avoid unnecessary damages and dangers to personnel and equipment, read these operating
instructions and follow the instructions.
Do not use the product for any other purpose other than described otherwise the guarantee will
become invalid.
Crypton Ltd is not liable for damage or injury arising from misuse. The user carries the risk
himself.
Notes for the user:
- Observe and comply with all the instructions in the operating manual
- Please follow the inspection and maintenance procedure as well as the prescribed tests
- The instruction for use should be observed by all persons working with the lift.
- The chapter “Safety Regulations“ should be especially observed.
- In addition to the safety remarks included in the instructions for use, the local valid regulations
and instructions at the location of operation should also be observed.
Obligations of the operator:
The operator is obliged to allow only those persons complying to the following requirements to work
with the unit
- Being well acquainted with the basic regulations concerning labour safety, and accident
prevention and being trained to operate the unit.
- Having read and understood the chapter concerning safety and warning instructions and
confirmed that by their signature.
Dangers when operating with the lift:
The CRYPTON-Lifts are designed and built according to technical standards and the approved
regulations for technical security. Yet, danger for body and life of the operator may occur when using
the lift carelessly.
The lift must only be operated:
- for its appropriate use
- in an unobjectionable condition concerning technical security.
To Next Page
Loading...
Need help?
General
