27
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to Privacy and press to select.
4. The display shows Privacy and Turn On. press to enable privacy. The display shows the
secure icon and Privacy On.
OR
The display shows Privacy and Turn Off. press to disable privacy. The display shows the
unsecure icon and Privacy Off.
Dual Tone Multi Frequency (DTMF) (Analog)
The Dual Tone Multi Frequency (DTMF) feature allow the radio to operate in a radio system with
an interface to telephone systems.
Procedure:
To initiate a DTMF call.
1. Press and hold PTT button.
2. Enter the desired number.
You can turn off the DTMF tone by disabling all radio tones and alerts
Security
You can enable or disable any radio in the system. For example, you might want to disable a
stolen radio, to prevent the thief from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to radios with these functions enabled.
Check with your dealer or system administrator for more information.
[J Radio Disable
Procedure:
1. Press then to Contacts and press to select. The entries are alphabetically sorted.
2. Press to the required alias or ID and press to select.
OR
Press to Manual Dial and press to select.
Key in the subscriber alias or ID and press.
3. Press to Radio Disable and press to select.
4. The display shows Radio Disable: <Subscriber Alias or ID> and the LED lights up RED.
5, Wait for acknowledgment.
6, If successful, a tone sounds and the display shows Radio Disable Successful.
OR
If not successful, a tone sounds and the display shows Radio Disable Failed.
Radio Enable
Procedure:
1. Press then to Contacts and press to select. The entries are alphabetically
sorted.
2. Press to the required alias or ID and press to select.
OR
Press to Manual Dial and press to select.
Key in the subscriber alias or ID and press.
3. Press to Radio Enable and press to select.
4. The display shows Radio Enable: <Subscriber Alias or ID> and the LED lights up RED.
5. Wait for acknowledgment.
6. If successful, a tone sounds and the display shows Radio Enable Successful.
OR
If not successful, a tone sounds and the display shows Radio Enable Failed.
To Next Page
Loading...