CSI CS750 - Utilities; Turning Keypad Tones on or off; Setting the Squelch Level (Analog); Setting the Power Level

28
Utilities
Locking and Unlocking the Keypad
You can lock your radio's keypad to avoid inadvertent key entry.
Procedure:
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to Keypad Lock and press to select.
4. The display shows Keypad Locked and returns to the Home screen.
5. To unlock the keypad, press followed by *.
6. The display shows Keypad Unlocked and returns to the Home screen.
Turning Keypad Tones On or Off
You can enable and disable keypad tones if needed.
Procedure:
1. Press then to Utilities and press to select.
2. Prsss to Radio Settings and press to select.
3. Press to Tones/Alerts and press to select.
4. Press to Keypad Tones and press to select.
5. The display shows Turn On. Press to enable keypad tones. The display shows Keypad
Tone On.
OR
The display shows Turn Oft. Press to disable keypad tones. The display shows Keypad
Tone Off.
Setting the Squelch Level (Analog)
You can adjust your radio's squelch level to filter out unwanted calls with low signal strength or
channels that have a higher than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted) calls and/or background noise.
However, calls from remote locations may also be filtered out.
Procedure:
Press the programmed Squelch button to toggle squelch level between normal and tight.
OR
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to Squelch and press to select.
4. Choose either Tight or Normal and press to select.
Screen returns to the previous menu.
Setting the Power Level
You can customize your radio's power setting to high or low for each channel.
Settings: High enables communication with radios located at a considerable distance from you.
Low enables communication with radios in closer proximity.
Procedure:
Press the programmed Power Level button to toggle transmit power level between high and low.
OR
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to Power and press to select.
4. Change your current setting as prompted on the display.
5. Press to select a new power level.