8
Installing/Removing the Belt Clip
Use the 2 screws (M2.5x8.0) supplied with the radio and insert these screws through the holes
in the radio clip and into the holes in the aluminum case. If you want to remove the clip from
the radio, just unscrew them, and remove the clip. You can put the screws back into the radio to
make sure you do not lose them.
Radio Overview
1.PTT ( PUSH-TO-TALK) Button
To make a call, press and hold the PTT button, then speak into the microphone in normal voice.
Release the PTT button to receive signals.
2. Side Button 1 (Programmable Button)
3. Side Button 2 (Programmable Button)
4. MIC lnput
Please keep your mouth about 10 cm (3-4 inches) away from the microphone to achieve the
best voice quality. If the distance is too far or too close to the radio, it will affect the voice quality
5. LCD
6. Key Pad
7. Top Button (Programmable Button)
8. Channel Selector, Rotate to select Channel
To Next Page
Loading...