29
Screen returns to the previous menu.
Turning the Voice Operating Transmission (VOX) Feature On or Off
This feature allows you to initiate a hands-free voice activated call on a programmed channel.
The radio automatically transmits, for a programmed period, whenever the microphone on the
VOX-capable accessory detects voice.
Pressing the PTT button during radio operation will disable VOX. To re-enable VOX, do one of
the following:
• Turn the radio off and powering it on again, OR
• Change the channel via the Channel Selector Knob, OR
• Follow the procedure below.
NOTE: Turning this feature on or off is limited to radios with this function enabled. Check with
your dealer or system administrator for more information.
Procedure:
Press the programmed VOX button to toggle the feature on or off.
OR
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to VOX and press to select.
4. The display shows VOX On. Press to disable VOX.
The display shows VOX Off.
OR
The display shows VOX Off. Press to enable VOX.
The display shows VOX On.
Controlling the Display Backlight
You can enable or disable the radio's display backlight as needed. The setting also affects
keypad backlighting accordingly.
Procedure:
Press the programmed Backlight button to toggle the backlight settings.
OR
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to Backlight and press to select.
4. The display shows Auto On. Press to enable the display backlight. The display shows
Backlight Auto On.
OR
The display shows Turn Off. Press to disable the display backlight. The display shows
Backlight Turn Off.
The display backlight and keypad backlighting are automatically turned off if the LED indicator is
disabled.
Turning the Radio Tones/Alerts On or Off
You can enable or disable the radio tones and alerts(except for the incoming Emergency alert
tone) if needed.
Procedure:
Press the programmed All Tones/Alerts button to toggle all tones on or off.
OR
1. Press then to Utilities and press to select.
2. Press to Radio Settings and press to select.
3. Press to Tones/Alerts and press to select.
To Next Page
Loading...