Chapter 6. Manage / Configure the Switch
123
“Promiscuous” is for ports that could be in Primary VLAN or Isolated VLAN.
Follow the steps to do the port assignment.
a. Select the type for a port.
b. If it is “Host”, you can select a VLAN from Community VLAN or mark Isolated VLAN and select from it.
(Community VLAN must be associated first.)
c. If it is “Promiscuous”, you can select a VLAN from Primary VLAN or mark Isolated VLAN and select from it.
d. Repeat a.~c. to complete the port assigment.
e. Click [Apply].
Please see the following picture.
3). Port-based VLAN
To Next Page
Loading...
Need help?
General
