Name: CTC Union GSW-3424M
Brand: CTC Union
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Chapter 6. Manage / Configure the Switch

# show ip igmp snooping mrouter

Type M'cast Router Ports

------ ----------------------------------------------------

static Eth 1/

show ip interface command will show current switch IP configuration.

For example,

# show ip interface

IP address and netmask: 192.168.1.12 255.255.255.0 on VLAN 1

show ip redirects command will show current IP gateway setting of the switch.

For example,

# show ip redirects

gateway: 192.168.1.254

8. show ip-filter command

This command is used to show current IP-Filter function status of the switch.

# show ip-filter

IP Filter Configuration

IP Address Filter: Disable

For showing filter IP address, “show interface switchport” command will show port settings one after another. And

“show interface switchport ethernet 1/x” command will show Port x settings.

9. show lacp command

This command is used to show current LACP configuration of the switch.

# show lacp ?

internal Shows config settings/operational state for local side

portstatus Shows LACP Port Status

sysid Shows channel groups system priority/MAC address

Questions and Answers:

Need help?

Do you have a question about the CTC Union GSW-3424M and is the answer not in the manual?

CTC Union GSW-3424M Specifications

General