B. Compliances
144
B. Compliances
EMI Certification FCC Class A Certification (USA)
Warning: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference to radio communications. It has been tested and found
to comply with the limits for a Class A digital device pursuant to Subpart B of Part 15 of FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be
required to take whatever measures are required to correct the interference.
CE Mark Declaration of Conformance for EMI and Safety (EEC)
This is to certify that this product complies with ISO/IEC Guide 22 and EN45014.
It conforms to the following specifications:
EMC: EN55022(1988)/CISPR-22(1985) class A
EN60555-2(1995) class A
EN60555-3
IEC1000-4-2(1995) 4kV CD, 8kV AD
IEC1000-4-3(1995) 3V/m
IEC1000-4-4(1995) 1kV - (power line), 0.5kV - (signal line)
This product complies with the requirements of the Low Voltage Directive 2006/95/EC and the EMC Directive
2004/108/EC.
Warning! Do not plug a phone jack connector into the RJ-45 port. This may damage this device.
To Next Page
Loading...
Need help?
General
