CTC Union GSW-3424M User Manual

Chapter 6. Manage / Configure the Switch
97
6.4.
2 SNMP
This function is used to configure SNMP function of the switch. This switch supports SNMP v1 & v2c agent function
and MIB II(Interface), Bridge MIB, 802.1Q MIB and Private MIB.
[System Information]
Object ID: this is the SNMP Object ID of the switch for SNMP management.
Up Time: this is the power-up running time of the switch.
Name: this the host name of the switch.
Contact: this is the contact information for the switch.
Location: this is the location information of the switch.
[SNMP -- Communities]
Get: this is the community string of GET command for SNMP operation. GET command is used to read switch
configuration/information.
Set: this is the community string of SET command for SNMP operation. SET command is used to set switch
configuration.

CTC Union GSW-3424M Specifications

General

Brand	CTC Union
Model	GSW-3424M
Category	Switch
Language	English