Chapter 6. Manage / Configure the Switch
68
private-vlan x association add y command is used to add the association between Primary VLAN “x” and
Community VLAN “y”.
private-vlan x association remove y command is used to remove the association between Primary VLAN “x” and
Community VLAN “y”.
no private-vlan x association command is used to reomove all the association for Primary VLAN “x”.
(config-vlan)# private-vlan 100 name sales ?
community Community
isolated Isolated
primary Primary
private-vlan x name yyy community command is used to create a Community VLAN with VLAN ID “x”, VLAN
name “yyy” for Private VLAN application.
private-vlan x name yyy isolated command is used to create a Isolated VLAN with VLAN ID “x”, VLAN name
“yyy” for Private VLAN application.
private-vlan x name yyy primary command is used to create a Primary VLAN with VLAN ID “x”, VLAN name
“yyy” for Private VLAN application.
no private-vlan x command can be used delete a Private VLAN “x”. (“x” is the VLAN ID).
11 vlan command
This command is used to create a 802.1Q VLAN. In this command, you have to assign the VLAN ID and VLAN
name for VLAN creation.
vlan x name yyy media ethernet command is used to create a 802.1Q VLAN with VLAN ID “x” and VLAN name
“yyy”. For example, “vlan 500 name sales media ethernet” will create a VLAN with VLAN ID 500 and VLAN
name “sales”.
no vlan x command can be used to remove the VLAN with VLAN ID “x”.
(Note
: If VLAN “x” already exists but name “yyy” is different, this command will rename the VLAN.)
To Next Page
Loading...
Need help?
General
