74
26. show system command
This command is used to show general system information/configuration of the
switch.
For example,
# show system
System Configuration
Main Board Information:
Firmware Version: 1.04.14
Mac Address: 00:11:22:33:44:55
Number of Ports: 10
1Q VLAN Max. Group: 1024
DHCP Client: Disable
Time Server: Disable
System Log Status: Enable
Remote Log: Disable
Web server: Enable
Web server port: 80
Web secure server: Disable
Web secure server port: 443
27. show trunk command
This command is used to show trunk configuration of the switch.
# show trunk ?
configuration Show Trunk Configuration
all Shows all Trunking Group Configuration
group Shows Each Trunking Group Configuration
show trunk configuration command is used to show trunk function
enable/disable setting.
show trunk all command is used to show port member settings of all trunk
groups.
show trunk group x command is used to show port member settings of Trunk
Group x. (“x” is the trunk group index.)
28. show version command
This command is used to show system version information and model
information.
For example,
# show version
Firmware Version: 1.05.00
Number of Ports: 10
Model Name: 10G Switch SNMP Management
29. show vlan command
This command is used to show VLAN configuration of the switch.
To Next Page
Loading...
