CHAPTER 4 8354/8404
4-26
D615-W02 May-2003
615W441A
615W442A
D. Fourth Stage (Transmission Rod
Disconnection)
1. Pull out spring pin (2) of transmission shift rod (1)
and disconnect the main transmission shift rod 2
(3).
2. Disengage the shuttle transmission arm (4) lock-
ing bolt (5) and raise the transmission arm.
(When reassembling)
• When using spring pin type in transmission rod,
the forked area should be toward the direction of
shaft.
• When assembling shuttle transmission arm, the
portion of transmission arm should be seated in
the groove (A) of shuttle fork rod.
(1) Transmission Shift Rod
(2) Spring Pin
(3) Main Transmission Shift Rod 2
(4) Shuttle Transmission Shift Arm
(5) Flange Bolt
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983
To Next Page
Loading...
