Cub Cadet 8354 - Troubleshooting

BRAKE
6-5
D615-W02 May-2003
Adjust
Replace
Replace
Adjust
Replace
Replace
Replace
Adjust
Replace
Replace
Replace
Change
• Brake pedal clearance is not constant
• Brake disc is worn
• Cam clutch is bent
• Brake pedal clearance is too small
• Cam plate ball is worn unequally
• Brake pedal return spring is worn or
broken
• Brake cam is corroded (rust)
• Brake pedal clearance is excessive
• Brake disc is worn
• Cam plate is bent
• Brake cam or lever is worn
• Transmission oil is improper
Brake power is not
constant
Brake is trailed
Brake power is weaken
Trouble Probable Cause RemarkRemedy
-
-
-
3. TROUBLESHOOTING
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983