CHAPTER 9 8354/8404
9-28
D615-W03 May-2003
615W930B
1. Disengage joint bolt 2 (8) and detach the hydraulic
pipe (1), (2) bracket (5), and quick coupler entirely.
2. Disengage nut (18) and washer (17) from aux. con-
trol valve and then detach aux. control valve from
the power lift body.
(When reassembling)
• Make sure the O-ring is not damage.
(1) Pipe A
(2) Pipe B
(5) Bracket
(6) O-Ring
(8) Joint Bolt 2
15.4 HYDRAULIC CYLINDER
A. DISASSEMBLY, ASSEMBLY
a. Pipe, Aux. Control Valve (If Attached)
(9) Quick Coupler
(10) Bolt
(11) Seal Washer
(12) Stud
(13) Double-Acting Valve
(14) O-Ring
(15) O-Ring
(16) Flange
(17) Washer
(18) Nut
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983
To Next Page
Loading...
