Cub Cadet 8354 - Disassembly, Assembly; Gear Pump

HYDRAULIC SYSTEM
9-25
D615-W02 May-2003
615W925A
15.1 GEAR PUMP
A. Disconnection of Gear Pump Assembly
1. Disassemble hydraulic pipe (3, 4) and intake pipe
(5) assembled into gear pump (1).
2. Disassemble bolt (2).
3. Detach gear pump (1).
615W926A
(When reassembling)
Tightening
torque
23.6 ~ 27.4 N·m
2.4 ~ 2.8 kgf/m
17.4 ~ 20.2 lbf·ft
49.0 ~ 58.8 N·m
5.0 ~ 6.0 kgf·m
36.2 ~ 43.4 lbf·ft
Hydraulic pipe 1
attaching bolt
(M8*1.25)
Hydraulic pipe 1
attaching bolt joint
bolt (18*1.25)
* Apply O-ring with grease to prevent damage.
(1) Hydraulic Pipe 1
(2) O-Ring
(3) O-Ring
(4) Joint Bolt
(5) Bolt
(1) Gear Pump (4) Hydraulic Pipe
(2) Bolt (5) Suction Pipe
(3) Hydraulic Pipe
15. DISASSEMBLY, ASSEMBLY
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983