Cub Cadet 8354 - Maintenance Specification; 3-Point System Hydraulic Pump; Relief Valve; Link Control

CHAPTER 9 8354/8404
9-22
D615-W02 May-2003
29.7 l/m
7.85 U.S.gal/min
0.11 mm
0.0043 in.
25.0 mm
0.984 in.
8354
8404
Depth of scratch
Clearance
Length
0.09 mm
0.035 in.
0.12 mm
0.0047 in.
25.75 mm
1.014 in.
13.1 3-POINT SYSTEM HYDRAULIC PUMP
13.2 RELIEF VALVE
Condition and Point Applicable Model and Item Allowable Limit
Hydraulic pump condition
* Engine speed (2700 rpm)
* Pressure 16.0 ~ 17.2 Mpa
165 ~ 175 kgf·m/cm²
2347 ~ 2489 psi
* Oil temp. 40 ~ 60°C
104 ~ 140°F
Housing
Relationship between gear shaft
and bush
Bush
Item Reference Dimension Allowable Limit
Relief valve condition
Engine speed: Max
Oil temp. 40 ~ 60 °C (104 ~ 140 °F)
Setting pressure 16.2 ~ 17.2 Mpa
165 ~ 175 kgf/cm²
2347 ~ 2379 Psi
Reference Dimension
13.3 LINK CONTROL
Item Reference Dimension Allowable Limit
Lift arm Free clearance
(Max. Rising Position)
2 ~ 10 mm
0.0787 ~ 0.3937 in.
13. MAINTENANCE SPECIFICATION
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983