HYDRAULIC SYSTEM
9-31
D615-W02 May-2003
615W937A
f. Bush
1. Remove bush (1), (2)
(When reassembling)
• When assembling new bush, apply the boss and
bush of the hydraulic cylinder with transmission oil.
(1) Bush (2) Bush
615W936A
(When Reassembling)
• Taking care of seal (12), insert into piston (11).
• Apply the cylinder with transmission oil and insert
the piston.
• Apply the bottom of the piston that contacts with the
connecting rod with grease.
• Align with holes of shaft (8) and crank (7).
• Apply the left and right bushes of the power lift body
with grease.
(1) Shaft (3) Elevating Arm
(2) Crank
[A] Hole [B] Mark
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983
To Next Page
Loading...
