Cub Cadet 8354 - Page 92

CHAPTER 3 8354/8404
3-4
D615-W02 May-2003
1. Disassemble power steering unit connection hoses
(1), (2), (3) and (4).
2. Remove frame cover (5) in left bottom of frame as-
sembly and then parallel pin (6) for connecting
shuttle lever.
3. Disconnect accelerator cable (7) and indicator
cable (8).
4. Disconnect panel wiring harness assembly (9) and
fender wiring harness assembly (10).
5. Disconnect clutch rod (11).
(1) Steering Hose Assembly T
(2) Steering Hose Assembly P
(3) Steering Hose Assembly L
(4) Steering Hose Assembly R
(5) Frame Cover
(6) Parallel Pin
(7) Accelerator Cable
(8) Indicator Cable
(9) Panel Wiring Harness Assembly
(10) Fender Wiring Harness Assembly
(11) Clutch Rod
615W302A 615W303A 615W304A
B. SECOND STAGE
615W305A
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983