Cub Cadet Challenger 500 User Manual

Periodic Maintenance and Adjustment 8-15
NOTE:
Make sure the O-ring is seated properly.
1. Oil filter cartridge 2. Oil filter wrench
NOTE:
An oil filter wrench is available at a nearby
service center.
5. Apply a light coat of engine oil to the
O-ring of the new oil filter cartridge.
1. O-ring
6. Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque with a torque wrench.
Tightening torque:
Oil filter cartridge:
12 ft·lbf (17Nm, 1.7m·kgf)

Cub Cadet Challenger 500 Specifications

General

Brand	Cub Cadet
Model	Challenger 500
Category	Utility Vehicle
Language	English