4-14 Control Functions
indicator and indicator light are
flashing) will cause the engine speed
to be limited until engagement is
complete.
Accelerator pedal
Press the accelerator pedal down to increase
engine speed. Spring pressure returns the
pedal to the rest position when released.
Always check that the accelerator pedal
returns normally before starting the engine.
1. Accelerator pedal
Before starting the engine, check the
accelerator pedal to be sure it is operating
smoothly. Make sure the accelerator pedal
fully returns to the idle position as soon as it
is released.
To Next Page
Loading...
Need help?
General
