send the fault code to the instrument display,
and it will flash on the clock.
If there is more than one fault code, they will
be shown in a rolling sequence. When fault
codes are present, in order to see the time
press the clock button, the time will be shown.
Then after five seconds, the fault code
returns again. Only after the fault is fixed, will
the time show automatically.
The description for the fault codes are shown
in Chapter 11 of this manual.
Fuel level indicator
The fuel level display will indicate the fuel
volume. When the fuel is getting low the fuel
pump symbol will flash.
Control Functions 4-9
1. Fuel level indicator 2. Fuel level warning indicator
To Next Page
Loading...
Need help?
General
