Cub C16 - Servicing

To Next Page

To Previous Page

34. WHEEL CARE

1. Wash your wheels regularly with warm soapy water to remove any buildup of dirt and

brake dust.

2. Use a different sponge or soft brush on your wheels to the one you use on your caravan

bodywork.

3. Never use abrasives such as stiff brushes or scouring pads.

4. Never use hot steam cleaning, as this can also damage the finish on your wheels.

35. SERVICING

WARNING: CHECK THE TIGHTNESS OF YOUR C16’S WHEEL NUTS, tyre pressures, wheel-

bearing temperatures, and brake adjustment after having travelled 100km, 1,000km and

approximately every 5,000km thereafter.

1. Regular servicing of your caravan should be undertaken at least every 12-months and at

10,000km, whichever comes first.

2. It is also highly recommended that you have your caravan serviced after any extended

journey, and prior to any further extended travelling.

3. Regular servicing should include checking tyres for wear and correct pressure, wheel-

bearings (inspect, re-pack or replace), suspension and shock absorbers, brakes, lights,

safety chains, tow hitch, and all other fixings.

4. Servicing should only be undertaken by suitably qualified technicians.

5. If any guidance is required, please contact your local Cub dealer.

6. Remember to check your tyre pressure regularly to save petrol, enhance handling, prevent

accidents, and maintain the life of your tyre. Tyre pressure should be adjusted to suit

conditions. Tyres should be cold when checking air pressure.

• 360kPa at 50% load

• 550 kPa at 100% load