CONTENTS
2
Cuda 2412 • 8.914-384.0 • Rev. 5/12
SECTION 1 Introduction and Safety
General Safety Information 4-5
Component Identification 6-7
SECTION 2 Installation
Before you Begin 8
Step 1: Make Electrical Connections 8
Step 2: Connect a Compressed-Air Line and Accessories 8
Step 3: Connect a Water Line 8-9
Step 4: Fill the Machine with Water and Add Detergent 9
SECTION 3 Operation
Main Operating Components 10-13
Detergents and Additives 13-14
Preparing the Machine for Use 14
Shutting Down the Machine 14
SECTION 4 Troubleshooting
Troubleshooting Guides 15-16
Troubleshooting the Electrical System 17
Testing Individual Components 18
SECTION 5 Maintenance and Repair
Maintaining the Machine 19
Repairing the Machine 20
Heating Element 20
Thermostat 21
Timers and Switches on the Control Panel 21
Torque Limiter 22
Turntable Motor 22-23
Using the Oil Skimmer System 23
To Next Page
Loading...
