4. BATTERY LOAD test is next. Press UP to
begin the battery load test. is test will
display a value from 10 (low) to 99 (high).
If the number is below 50 we recommend
you replace the batteries.
5. FILTER veries the camera lter works
correctly. Press UP to test and you should
see the lter move inside the camera.
6. IR LED tests the camera’s illumination
LEDS Press UP to turn on the LEDs.
NOTE: for Black Flash you will not be able
to see the LEDs turn on. Use a cell phone
camera to view the LEDs. (Note – some
cell phones, like the iPhone 5S, will not
display the IR LEDs.)
7.
SD CARD veries your SD card is functioning.
Press UP to test your SD card. is test will
write a le to the SD card and read it back to
verify the SD card is functional.
8. IMAGE - Press UP or DOWN to take a still
image. You can view this image on your PC
or other viewing device to assure it is OK.
9. VIDEO - Press UP or DOWN to record a
video. You can view this video on your PC
or other viewing device to assure it is OK.
Appendix E: Trophy Room
Trophy Room
Cuddeback oers a free Windows PC tool to
manage your trail camera images. Trophy Room
is valued at over $100, but is free to all trail
camera users.
• Works with all brands of trail cameras
• Copies images from SD card to PC with
a simple mouse click
• Organizes images by year, property,
and camera location
• Zoom and enhance images
• Automatically determines buck/
doe/fawn ratios
• Prepare reports of animal activity
versus moon phase
48 49
To Next Page
Loading...
