CUH SDVC31 Series - Page 17

CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
9
Output Voltage
Output Frequency
Turn on the power switch of the
controller, and the voltage "U 150 "
should be displayed and Voltage
indicator lights up and the
vibratory feeder should start
vibrating.
Resonant frequency of the vibrator means the
the maximum amplitude.
Each vibratory has its natural mechanical resonance frequency, adjust the
output frequency of the controller to this frequency to achieve the best
working state.
frequency value that creates
Step Five:
Step Six:
Press to adjust the voltage to
30~50V, then press the and
hold for 2 seconds enter the output
frequency "E" adjustment state.
Use to search the natural
frequency of the vibratory feeder,
which is the resonant frequency.
▼ or ▲
Variable Frequency Digital Controller
for Vibr
atory Feeder
Variable Frequency Digital Controller
for Vibratory Feeder
Saturated
Saturated
Accelerate
Accelerate
Remote
Remote
Stop
Stop
Lock
Lock
Voltage
Voltage
Frequency
Frequency
On Delay
On Delay
Off Delay
Off Delay
Soft Start
Soft Start
SDVC31-M
SDVC31-M
SDVC31 Series
Variable Frequency Digital Controller for Vibratory Feeder
SDVC31SMSEN_4.012023-08