CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
14
In order to avoid sudden shock to the vibrator coil, the controller can gradually
increase output voltage from 0 to the preset value when startup
Soft Startup Time ( t ): The period of time it takes for the controller to
smoothly rise its output voltage from 0 to the preset value when startup.
Variable Frequency Digital Controller
for Vibr
atory Feeder
Saturated Accelerate
Remote
Stop
Lock
Voltage
Frequency
On Delay
Off Delay
Soft Start
SDVC31-M
4.4 Soft Startup Time
8
to enter the basic parameter
interface.
8Short press to switch to soft
startup parameter "t" and the
default value 0.5.
8Press ▲ or ▼ to adjust the
parameter value.
Press and hold for 2 seconds
t means
Soft Startup Time
Soft Start Indicator
SDVC31 Series
Variable Frequency Digital Controller for Vibratory Feeder
SDVC31SMSEN_4.012023-08
The keyboard lock state will not disappear due to power off.
When in the locked state, the operation button does not
respond and this indicator flashes.
Variable Frequency Digital Controller
for Vibratory Feeder
Saturated Accelerate
Remote
Stop
Lock
Voltage
Frequency
On Delay
Off Delay
Soft Start
SDVC31-M
4.5 Keyboard Lock
When the parameters of the controller are set, the keyboard lock function can lock all
buttons on the panel to avoid misoperation.
Even if it is turned off and then turned on again, the state of the keyboard lock remains
the state it was in the last time it was turned off.
Lock indicator
8
lock all buttons on the panel. The
lock indicator lights up.
8Press and hold for 2 seconds
again to unlock.
Press and hold for 2 seconds to