CUH SDVC31 Series - Chapter Ⅴ Advanced Function Description; Remote Speed Control

CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
15
A1
B1
C1
A2
B2
C2
D1
A3
B3
B4
C3
D2
Chapter Ⅴ Advanced Function Description
This chapter introduces parameter settings. advanced
Photosensor
Speed Ctrl
Sensor
Ctrl Out
5.1 Remote Speed Control
The controller supports external analog signal to control output voltage,
analog signal supports potentiometer, 1~5V voltage, 4~20mA current.
Potentiometer control connection
Suggest：
Please use a 1K linear potentiometer
When the remote speed control signal takes effect, the speed control indicator
lights on , at the same time regulating the voltage on the panel will fail.
Remote speed control power supply+5V
Remote speed control input
Remote speed control resistive ground
SDVC31 Series
Variable Frequency Digital Controller for Vibratory Feeder
SDVC31SMSEN_4.012023-08