Culligan C100 - Power Troubleshooting

C100 Manual
Page 45 - Revision:EU-2020-10-13
POWER TROUBLESHOOTING INDEX
1. Red Heater and Compressor Power Switch won't light and the Red LED on the
Front won't light
2. Red Power Switch is lit but the red LED on the Front is not lit
3. Compressor Runs but does Not Chill
4. Compressor is Not Running
1. Red Heater and Compressor Power Switch won’t light and the Red LED onthe
Front won’t light
Possible Reason
Solution
Circuit Breaker Check the Circuit Breaker
Fuse is Blown Replace Fuse
Defective / Loose Power Cord
Check that power cord is properly plugged in. If it is properly
plugged in, use a different power cord to verify.
Failed Power Line Noise Filter,
Electromagnetic Interference
filter (EMI)
Replace EMI
Defective Red Heater /
Compressor Switch
Replace Red Heater / Compressor Switch