61
Positioning and Operation Range (Example of wireless ash
shooting)
• Autoash Shooting with One Slave Unit
Transmission distance is
about 100m.
• Use the supplied mini stand to position the slave unit.
• Before shooting, perform a test ash and test shooting.
• The transmission distance might be shorter depending
on the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Wireless Multiple Flash Shooting
You can divide the slave units into two or three groups and
perform E-TTL II autoash while changing the ash ratio (factor).
In addition, you can set and shoot with a different ash mode for
each ring group, for up to 5 groups.
• Auto Shooting with Two Slave Groups
• Auto Shooting with Three Slave Groups
A
B
A
B
C
616x0_CUlight_FR60X_BDA_Canon englisch.indd 61 24.10.2016 13:55:42
To Next Page
Loading...
