78
Other Applications
Sync Triggering
The Sync Cord Jack is a 3.5mm plug. Insert a trigger plug
here and the ash will be red synchronously with the camera
shutter.
Modelling Flash
If the camera has a depth-of-eld preview button, pressing it will
re the ash continuously for 1 second. This is called modeling
ash.
It enables you to see the shadow effects on the subject and the
lighting balance. You can re the modeling ash during wireless
or normal ash shooting.
• To avoid overheating and deteriorating the ash head, do
not re the modeling ash for more than 10 consecutive
times. If you re the modeling ash 10 consecutive
times, allow at least 10 minutes’ break for the camera
ash.
• The modeling ash cannot be red with the EOS 300 and
Type-B cameras.
Auto Focus Assist Beam
In poorly-lit or low-contrast shooting environments, the built-in
auto focus assist beam will automatically light on to make it eas-
ier for autofocus. The beam will light up only when autofocus is
difcult and get out as soon as the autofocus becomes correct.
If you want to turn off the auto focus assist beam, set the “AF”
to “OFF” on the C.Fn settings.
• If you nd the auto focus assist beam does not light up,
this is because the camera has got a correct autofocus.
Position
Center
Periphery
Effective Range
0.6~10m / 2.0~32.8 feet
0.6~5m / 2.0~16.4 feet
616x0_CUlight_FR60X_BDA_Canon englisch.indd 78 24.10.2016 13:56:32
To Next Page
Loading...
