82
Control with the Camera’s Menu Screen
If the camera ash is attached to an EOS camera which has a
speedlite control function, the ash can be controlled using the
camera’s menu screen. For the menu operation procedure, refer
to your camera’s instruction manual.
• Setting Camera Flash Functions
The following ash functions are settable according to different
ash modes.
1. Flash mode
2. Shutter sync (1st/2nd curtain, high speed sync)
3. FEB
4. Flash exposure compensation
5. Flash ring
6. Clear camera ash’s settings
• Custom Functions of Camera Flash
C.Fn-00, C.Fn-01, C-Fn-03, C.Fn-04, C.Fn-08, C.Fn-10, C.Fn-20
and C.Fn-22.
Clear All Flash Custom Functions
Flash function settings screen Flash C.Fn settings screen
Shutter syne.
FEB
Flash
exp. comp
E-TTL II
Flash firing
E-TTL II
Flash mode
1st curtain
-
3.2.1.0
-
.
1.2.3
-
3.2.1.0
-
.
1.2.3
Evaluative
Enable
Auto powe off
0:Enabled
1:Disabled
-
0 1 2 3 4 5 6 7 8 9 10 11 12 13
0 0 0 0 0 0 0 0 0 0 0 0 0 0
• If ash exposure compensation has already been set with
the camera ash, ash exposure compensation cannot
be set with the camera. To set it with the camera, the
camera ash’s ash exposure compensation must be
set to zero.
• If any Flash Custom Functions and ash settings other
than ash exposure compensation have been set by both
the camera and the ash, the latest settings will take
effect.
616x0_CUlight_FR60X_BDA_Canon englisch.indd 82 24.10.2016 13:56:36