CULLMANN CUlight FR 60C - ETTL: Use the Wireless Shooting of Flash Ratio

75
About Master Unit
Use two or more master units. By preparing several cameras
that with master units ash attached, cameras can be changed
in shooting while keeping the same lighting source (slave unit).
5. ETTL: Use the Wireless Shooting
of Flash Ratio
Auto Flash Shooting with Two Slave Units
Divide the slave units into A and B groups and balance their
shooting illumination (ash ratio).
Auto control exposure to make the total output of A and B ash
groups up to standard exposure.
1
Setting the ash groups of
slave unit.
• Set the ash as slave unit.
• Press Function Button 3
<
Gr
> and choose < A>
or < B >.
• Set one slave unit as < A >,
the other as < B >.
2
Setting <MENU 2>.
• Step 2 to Step 4 are set on
the master unit.
• Press the Function Button
4 on the master unit so that
<
MENU 2
> is displayed.
3
Setting <RATIO A:B>.
• Press Function Button 2
<
R ATIO
> so that < RATIO
A:B > is displayed.
4
Setting ash ratio.
• Press Function Button 3
<
Gr
>.
• Turn the Select Dial to set
the amount of ash ratio
and press < SET > button to
conrm.
5
Taking the picture
• The slave units will ash
according to the ash ratio.
Using Automatic Wireless Flash with Multiple Slave Units
When stronger flash output or
more convenient lighting operation
is needed, increase the number of
slave units and set it as a single
slave unit.
To add slave units, use the same
steps as setting “automatic
wireless flash with a single slave
unit”. Any flash group can be set
(A/B/C).
When the number of slave units is
increased and the master unit
flash firing is ON, automatic
control is implemented to make all
groups of flashes fire the same
flash output and ensure the total
flash output up is to standard
exposure.
The slave unit might be out of order or fire an unwanted flash due to the
nearby fluorescent lamp or computer screen.
● Press the depth-of-field preview button on the camera to fire a modeling
flash.
● If the slave unit’s auto power off function is workable, press the master
unit’s test button to power it on. Please note that test firing is unavailable
during the camera’s regular metering time.
● The effective time of slave auto power off is changeable. (C.Fn-Sv APOT
Page 74)
● By making some settings, the auto AF-assist transmitter will not blink after
the slave unit’s flash ready indicator is lightened. (C.Fn-AF Page 74)
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be
appeared on the slave unit automatically. The slave unit does not
need any operation. Use the following settings to make wireless
flashes according to the same methods with normal flash shooting.
● Flash Exposure Compensation ( Page 48)
● Flash Exposure Bracketing ( Page 48)
● Flash Exposure Lock (Page 49)
● High-Speed Sync ( Page 50)
● Manual Flash (Page 51)
● Stroboscopic Flash (Page 52)
SYNC
FEB
Press Function Button 4 so that < >、< >和
< > are displayed.
SYNC
FEB
About Master Unit
Use two or more master units. By preparing several cameras that
with master units flash attached, cameras can be changed in
shooting while keeping the same lighting source (slave unit).
5.ETTL: Use the Wireless Shooting of Flash Ratio
Auto Flash Shooting with Two Slave Unit
Divide the slave units into A and B groups and balance their shooting
illumination (flash ratio).
Auto control exposure to make the total output of A and B flash
groups up to standard exposure.
Setting the flash groups of
1 slave unit.
● Set the flash as slave unit.
● Press Function Button 3
< > and choose
<A> or <B>.
● Set one slave unit as <A>,
the other as <B>.
Gr
MENU 2
RATIO
Setting < >.
2
● Step 2 to Step 4 are set on
the master unit.
● Press the Function Button
4 on the master unit so that
< > is displayed.
MENU 2
Setting <RATIO A:B>.
3
● Press Function Button 2
< > so that
<RATIO A:B> is displayed.
Setting flash ratio.
4
● Press Function Button 3
< >.
● Turn the Select Dial to set
the amount of flash ratio
and press<SET> button to
confirm.
Taking the picture.
5
● The slave units will flash
according to the flash ratio.
Gr
- 67 - - 68 -
Using Automatic Wireless Flash with Multiple Slave Units
When stronger flash output or
more convenient lighting operation
is needed, increase the number of
slave units and set it as a single
slave unit.
To add slave units, use the same
steps as setting “automatic
wireless flash with a single slave
unit”. Any flash group can be set
(A/B/C).
When the number of slave units is
increased and the master unit
flash firing is ON, automatic
control is implemented to make all
groups of flashes fire the same
flash output and ensure the total
flash output up is to standard
exposure.
The slave unit might be out of order or fire an unwanted flash due to the
nearby fluorescent lamp or computer screen.
● Press the depth-of-field preview button on the camera to fire a modeling
flash.
● If the slave unit’s auto power off function is workable, press the master
unit’s test button to power it on. Please note that test firing is unavailable
during the camera’s regular metering time.
● The effective time of slave auto power off is changeable. (C.Fn-Sv APOT
Page 74)
● By making some settings, the auto AF-assist transmitter will not blink after
the slave unit’s flash ready indicator is lightened. (C.Fn-AF Page 74)
Using Fully Automatic Wireless Flash
The FEC and other settings that set on the master unit will also be
appeared on the slave unit automatically. The slave unit does not
need any operation. Use the following settings to make wireless
flashes according to the same methods with normal flash shooting.
● Flash Exposure Compensation ( Page 48)
● Flash Exposure Bracketing ( Page 48)
● Flash Exposure Lock (Page 49)
● High-Speed Sync ( Page 50)
● Manual Flash (Page 51)
● Stroboscopic Flash (Page 52)
SYNC
FEB
Press Function Button 4 so that < >、< >和
< > are displayed.
SYNC
FEB
About Master Unit
Use two or more master units. By preparing several cameras that
with master units flash attached, cameras can be changed in
shooting while keeping the same lighting source (slave unit).
5.ETTL: Use the Wireless Shooting of Flash Ratio
Auto Flash Shooting with Two Slave Unit
Divide the slave units into A and B groups and balance their shooting
illumination (flash ratio).
Auto control exposure to make the total output of A and B flash
groups up to standard exposure.
Setting the flash groups of
1 slave unit.
● Set the flash as slave unit.
● Press Function Button 3
< > and choose
<A> or <B>.
● Set one slave unit as <A>,
the other as <B>.
Gr
MENU 2
RATIO
Setting < >.
2
● Step 2 to Step 4 are set on
the master unit.
● Press the Function Button
4 on the master unit so that
< > is displayed.
MENU 2
Setting <RATIO A:B>.
3
● Press Function Button 2
< > so that
<RATIO A:B> is displayed.
Setting flash ratio.
4
● Press Function Button 3
< >.
● Turn the Select Dial to set
the amount of flash ratio
and press<SET> button to
confirm.
Taking the picture.
5
● The slave units will flash
according to the flash ratio.
Gr
- 67 - - 68 -
616x0_CUlight_FR60X_BDA_Canon englisch.indd 75 24.10.2016 13:56:26