86
Firmware Upgrade
This ash supports rmware upgrade through the USB port.
Update information will be released on our ofcial website.
Maintenance
• Shut down the device immediately should abnormal operation
be detected.
• Avoid sudden impacts and the product should be dedusted
regularly.
• It is normal for the ash tube to be warm when in use. Avoid
continuous ashes if unnecessary.
• Maintenance of the ash must be performed by our authorized
maintenance department which can provide original acces-
sories.
• This product, except consumables e.g. ash tube, is supported
with a one-year warranty.
• Unauthorized service will void the warranty.
• If the product had failures or was wetted, do not use it until it is
repaired by professionals.
• Changes made to the specications or designs may not be
reected in this manual.
USB connection line is not included in this product. The
USB port is a standard Micro USB socket. Common USB
conncection line is applicable.
Compatible Camera Models
This ash unit can be used on the following Canon EOS series
camera models:
Camera models …
5D Mark III 5D Mark II
6D
7D
60D 50D 40D
30D
650D 600D 550D 500D 450D
400D Digital
1100D 1000D
1DX
This table only lists the tested camera models, not all
Canon EOS series cameras. For the compatibility of other
camera models, a self-test is recommended.
Rights to modify this table are retained.
Declaration of Conformity
CULLMANN GERMANY GmbH herewith declares, that this
device is in compliance with the basic requirements and all other
applicable regulations of the directive 1999/5/EC. You nd the
declaration of conformity acc. to the R&TTE directive 1999/5/EC
under www.cullmann.de.
616x0_CUlight_FR60X_BDA_Canon englisch.indd 86 24.10.2016 13:56:36
To Next Page
Loading...
