Cumberland Evolution 3000 - Connecting the Powertrak Power Auxiliary Switches to Evolution 3000 & 3001

Part No. 4801-5307 Rev 2-15 Evolution 3000 and 3001 54 of 70
9.13 Connecting the Power Trak Power Auxiliary Switches to Evolution 3000 &
3001
PowerTrak
AUX
SWITCH
CONTROLLER
AC IN
HOT
NEUT.
LOWER
GND.
HOT
OUT
CLOSE
IN
OPEN
IN
COM
UPPER
NOTE: If curtain is setup to pull curtain up to open, then reverse wires connected to
“Upper” and “Lower” terminals.
Inset A
Tunnel Aux. Input
Open
AUX
Close
AUX
Com
Inset A
Tunnel Auxiliary
Input
See Note
below
Inset C
Inset C
Vent Aux. Input
Open
AUX
Close
AUX
Com
Inset B
Vent Auxiliary
Input
NOTE: Vent auxiliary
connects the same as
tunnel auxiliary.
Inset B
WARNING!
LOW VOLTAGE!
Keep Separate From
High Voltage Wires!
PCB 169