16 | JetScan iFX
®
i100 scanner | Stopping conditions and recovery steps
Condition The machine could not
identify characters within a check MICR
line. Question marks denote unidentied
characters.
Action To correct unidentied
characters and include the check in the
count:
1. If desired, press DISABLESNAP to
prevent the cursor from automatically
moving to the end of the MICR line
after all unidentied characters are
corrected.
2. Press PREV or NEXT to select the
unidentied character for correction.
3. Using the snippet, or image, of the
MICR line as a reference, press the
appropriate numeric or MICR-symbol
button to make the correction.
Press
to view additional numbers
Select i100-series models process checks, deposit slips and other nancial
institution MICR documents that meet U.S. and Canadian standard specications.
These screens only appear on machines with:
•Thecheckcaptureoption.
•TheDOCUMENTDATACORRECTIONADJUSTMENTsettingscongured.
•CHECKS ONintheDOCUMENTCAPTURESETUPMENU.
M I C R - l i n e c o r r e c t i o n s c r e e n
MICRnumberisincompletescreen
and symbols. Press
to view previous numbers and symbols.
Press
to move the MICR snippet to the left. Press to move the MICR snippet
to the right.
To insert a character in the MICR-line correction eld, press PREV or NEXT to move the
cursor to the desired position and press INSERT. A new question mark (?) appears.
Select this character and press the appropriate numeric or MICR-symbol button.
Press DELETE to remove a highlighted character in the MICR-line correction eld.
4. When all unidentied characters have been corrected, press DONE to return to the
main screen and continue processing.
When DONE is pressed and all unidentied characters have not been corrected,
theMICRNUMBERISINCOMPLETEscreenappears.Dooneofthefollowing:
•ReturnthechecktothehopperforreprocessingandselectREJECT, CHECK
PLACEDINTHEHOPPER.
•SelectGOBACK, EDITTHEMICRNUMBER to return to the MICR-LINE
CORRECTION screen.