CUMMINS ALLISON JetScan iFX i100 - Page 20

20 | JetScan iFX
®
i100 scanner | Stopping conditions and recovery steps
Condition The machine could not
identify characters in a note serial
number. Question marks denote
unidentied characters.
Action To correct unidentied
characters and include the note in the
count:
1. Press PREV or NEXT to select the
unidentied character for correction.
2. Using the snippet, or image, of the serial number as a reference, press the
appropriate alpha or numeric button to make the correction.
If the character to be corrected onlycanbealetter, then letters will appear on the
buttons. If the character to be corrected onlycanbeanumber, then numbers will
appear on the buttons.
Press
to view additional letters/numbers. Press to view previous
letters/numbers.
3. When all unidentied characters have been corrected, press DONE to return
to the main screen and continue processing.
When DONE is pressed and all unidentied characters have not been corrected,
theSERIALNUMBERISINCOMPLETEscreenappears.Dooneofthefollowing:
•ReturnthenotetothehopperforreprocessingandselectNOTEPLACEDIN
THEHOPPER.
•SelectEDITSERIALNUMBERtoreturntotheSERIAL-NUMBERCORRECTION
screen.
These screens only appear on machines with:
•Theserial-numbercaptureoption.
•NOTESONintheDOCUMENTCAPTURESETUPMENUandtheDOCUMENT
DATA STORAGE screen congured for all or select denominations.
•TheDOCUMENTDATACORRECTIONADJUSTMENTscreenconguredforallor
select denominations.
Serial-numbercorrectionscreen
When entering a 10-digit serial number for a note, press NONE for the
eleventh and nal character in the string.