52 Cummins INLINE™ 7 Data Link Adapter Installation and Setup Manual
Chapter 3 • Installing the Drivers and Setting Up the Device
The following Wireless Settings fields are available:
• Network Name
• Frequency (used to switch between 2.4 and 5 GHz)
• Security (WEP, WPA/WPA2)
• Password
• Key Index (only available with th
e WEP security selection)
i The settings for connecting to your company network may differ from one
installation to another. To ensure network security, your Information Tech-
nology (IT) administrator will need to oversee the installation and specify
the appropriate configuration parameters.
The Internet Protocol (TCP/I
P) portion of the screen is also available to
you to enter the required settings. There are two options:
• Obtain an IP address automatically (i.e., a dynamic IP address)
• Specify an IP address (i.e., a static IP address that does not change)
— IP Address
— Subnet Mask
— Default Gateway
i You will need to obtain this information (i.e., IP Address, Subnet Mask)
from the designated IT person or network administrator for your location.
Depending on how your local network is configured, you may also need to
enter Default Gateway information.
To Next Page
Loading...