Current Tools Omni 747 - BENDING INSTRUCTIONS: 1;2 TO 1-1;4 CONDUIT; Installing the Roller Support

17
1
⁄2" TO 1
1
⁄4" BENDING INSTRUCTIONS – EMT, IMC AND RIGID
1. Select and mount the
1
⁄2" to 1
1
⁄4" shoe as described in the shoe set-up
section on pages 12 and 13.
2. Next, install the
1
⁄2" thru 1
1
⁄4" pin-on roller support (see photo below).
1
⁄2" thru 1
1
⁄4" EMT, IMC and
Rigid conduit all use the pin-
on 4 roller support.
(Part #747-972)
Attach the pin-on roller support as shown below:
PIN ON
ROLLER
SUPPORT
PIN