2 — INSTALLATION & WIRING: Installation Checkout
G. Take the vehicle down off the blocks and drive it in a clear area. It should
have smooth acceleration and good top speed.
H. On vehicles that are intended to plug brake, test the plug braking by driv-
ing forward at moderate speed and shifting into reverse without letting up on
the throttle. The vehicle should smoothly brake to a stop and accelerate in
reverse.
I. On vehicles that are intended to have plug braking inhibited, verify that
the maneuver in “H” produces freewheel coasting.
16
Curtis 1204M/1205M/1209M/1221M Manual
To Next Page
Loading...
Need help?
General
