Curtis 1253 - Monitor Menu

Curtis 1253 Manual, Rev. F
Monitor Menu
Items are listed here in the order in which they appear in the Monitor Menu
displayed by the programmer.
HEATSINK TEMP Heatsink temperature, in °C.
CAP VOLTAGE Voltage at capacitor bank (controller B+ bus).
BATT VOLTAGE Voltage at KSI (pin J1-1).
MOTOR VOLTAGE Voltage across controller’s B+ and M- bus bars.
THROTTLE% rottle request, as % of full throttle.
MAIN CONT DRVR Main contactor output: on/o.
DUTY CYCLE % PWM duty cycle of motor drive section.
SS1 INPUT Speed Select switch 1: on/o.
SS2 INPUT Speed Select switch 2: on/o.
SS3 INPUT Speed Select switch 3: on/o.
SS4 INPUT Speed Select switch 4: on/o.
LIFTLOCK INPUT Lift lockout: on/o.
INTERLCK INPUT Interlock switch: on/o.
APPENDIX B: PROGRAMMER OPERATION & MENUS
B-5