Curtis 1268 - 5. TUNING GUIDE; Tuning the Active Throttle Range

27
Curtis 1268 Manual, Rev. D
WARNING OPTION
The warning option parameter sets the output pattern—flash or solid—of the
external LED (Pin 22) and the warning beep conditions during anti-rollback
and overvoltage (Pin 19).
WARNING OPTION is programmable from 0 to 7:
EXTERNAL LED ANTI-ROLLBACK OVERVOLTAGE
SETTING OUTPUT BEEP BEEP
0 flash no no
1 flash no yes
2 flash yes no
3 flash yes yes
4 solid no no
5 solid no yes
6 solid yes no
7 solid yes yes
3 — PROGRAMMABLE PARAMETERS: Fault Parameters