Custo Med Ergometer ec3000 - Page 42

T
raining programs
Ergometer ec
3000
5
-
24
Process of programming
At first the program is determined by
selection of the corresponding program
number ( cf. chapter 1.2.3 )
„STEP“ must be selected as program type
for step programs
( cf. chapter 1.4.3.2 ).
Then
the program step is selected
with the step number
( cf. chapter 1.4.3.4 ).
The capacity is determined for
this program step
( cf. chapter 1.4.3.5 ).
The period of time is determined
for this program step ( cf. chapter 1.4.3.6 ).
Selection of
program step
Setting
of the capacity
Setting
of the
duration
Key
“START/PAUSE”
Key
“START/PAUSE”
Key
“START/PAUSE”
Key
“STOP”
Key
“STOP”
Key
“STOP”
Key
“START/PAUSE”
ec_step_seq01.cdr
17. Juli 2002
Program
type selection
“STEP”
Key
“PROG”
Key
“STOP”